Project 1 Neutral Cure Adhesive Sealant for Snow Guards

$14.98 CAD

In stock

SKU: NC-SEALANT Category: Sealant

One Tube of Sealant will fasten about thirty (25) Sno-Safe Original Snow Guards and about (10) Sno-Safe Wide Snow Guards

Shear Load Tested at an Independent Lab:

Holds 1,220 lbf when fastened to a metal roofing panel with SB-190 Everseal Adhesive only

Holds 2,280 lbf when fastened to a metal roofing panel with SB-190 Everseal Adhesive & screws

VIEW SHEAR LOAD TESTING REPORT

Everseal Adhesive Sealant

Versatile, high strength, hard setting, one-part adhesive sealant for fastening snow guards to roof. Superb 2,000 PSI tensile strength. Water and weatherproof. Ideal alternative when mechanical fasteners cannot be used.

Applicable Substrates:

Metal
PVC
Rubber Membranes
Plastic
Vinyl
Glass
Wood
Cement

Square channel grooves for adhesive increases shear strength

Application:

Interface and surfaces must be clean, dry and free of dust, dirt, oil and water-proofing and release agents. Cut cartridge nozzle at slant to 1/4" hole and puncture inner seal, apply bead size as desired. Apply uniform bead with steady pressure. Tool immediately after application to ensure full contact with both sides of the joint area. Sealant starts to skin over in 20-25 minutes.

NOTE: Do not use Neutral Cure on copper or lead. For TPO Roofing Application, we recommend Lucas #6600 Universal Sealant.